Install Phaseback VSGR (voltage stabilizing ground reference).
No other changes required. It’s that simple!
Phaseback VSGR low voltage units are simple to select. PDF Download below.
Phaseback VSGR Protects all equipment on the Transformer secondary, making other devices unnecessary, such as HRG, TVSS (SPDs), Voltage Regulators, Snubber circuits, etc.
For 600V 3phase Systems including:
Delta, Wye, Impedance Grounded, un-grounded, or solidly grounded.
To properly size VSGR, we need to answer a couple of questions:
- System Voltage, needing protection?
- kVA rating of the supply Transformer? If you know the kVA, great, go the table.
- If you don’t know the kVA rating, the circuit breaker, fed by the transformer can help. Example: 1200A main CB (use Trip rating).
- Formula: Transformer kVA is approximately equal to
- (Volts x CB Amp rating x 1.732) / 1000.
Example 1, 480V Main Circuit Breaker, rated 800A,
((480X800) X 1.732) / 1000 = 665kVA. Select 750kVA
model # PB480Y750WFC
Example 2, for 480V Main Circuit Breaker, rated 250A,
((480X250) X 1.732) / 1000 = 208kVA. Select 250kVA
model # PB480Y250WFC
Voltages phase / ground will be good up to any high impedance loads, such as transformers, Drives, UPS systems, so they will have good Voltage input.
VSGR provides needed Voltage protection!
- No Transients
- No Single Phase Sags
- Phase Angles corrected
- Energy Cost is reduced! 1 year payback
- NO SINGLE PHASE GROUND FAULTS!
- Arc Flash risks are greatly reduced!
Call me for a demonstration Cy Cates 832 647 4606 cycates@cycates.com
#phaseback #SPD #arcflashprevention #vsgr #grounding #PowerQuality #balancephasevoltage #transient #StopLightningDamage #Lightning #savemoneyonelectricity #StopArcFlashDamage #voltagestabilizer #voltagestabilizinggroundreference #HRG #empprotection
